Brushless Motor Tester
  
Scope
Applicable for testing general properties of DC brushless motors
Basic Functions
1. Test voltage settable; test no-load speed and no-load current of a motor
2. No speed sensor required; detect the motor speed directly by spectrum analysis
3. Speed governance voltage settable, rise time settable
4. Hall element test:
(1) High and low levels
(2) Duty ratio
(3) Phase difference
(4) Waveform display
5. Show the operating current waveform
6. Show real-time curves of current, speed;
7. Using motor terminal voltage feedback in internal precision programmable SMPS, fully offset the test circuit voltage drop and keep the voltage actually applied on a motor accurate
8. Built-in programmable SMPS used to automatically limit the output current based on the rated power; when the motor does not rotate or is short circuited during the test in case of motor quality problems or operator error, the instrument can automatically monitor abnormalities and turn off the power in a short time. Once external abnormalities are released, the instrument can automatically resume work. By this way, it keeps the system secure and reliable
9. Manual & auto test modes available; create motor model projects
10. Set limits for test items, issue sound or light alarm in case of test data over-limit, give NG or GO result in the screen, and issue sound or light alarm in case of NG
11. Save test data in Excel, and export them via USB
Optional
Direction Auto-Identification |
HIPOT, Insulation Resistance Test |
Current Waveform Detection & Analysis |
Label Print and Check |
>>> Enter the Product Selection Guide ...
Technical Specifications
Model |
K603 |
Voltage Test |
10~60 V ±0.5% |
No-Load Current Test |
0.1~30 A ±1.0% |
Output Power |
2400W |
No-Load Speed |
100~30000 RPM ±0.1% |
Voltage Given for Speed |
0~5 V |
Given Voltage Rising Edge Time |
0~10000 ms |
Hall Test |
High & low levels: 0~13.5V
Duty ratio: 0~100%; phase difference: 0~360° |
Display |
10-inch color touch screen |
Host Computer |
CPU clock speed 1.86G, SSD hard drive 32G, memory 2G |
Power Supply |
Voltage 220V 50Hz, capacity ≤1.2kVA |
Operating Environment |
Temperature 0~40℃, humidity ≤85% |
Outline Dimensions |
W × H × D = 430 × 280 × 280 |
Remarks |
For technical indicators, test functions, system functions, shape & structure, configuration of fixtures & clamps, the ordering requirements shall prevail | |