User login
User name:
Register  Forget password?
      Product List
Finished Motor Tester
Motor Tester
Motor Parts Tester
Special Motor Tester
Other Testers
  All Products >> Wiper Motor Tester (details)

Wiper Motor Tester


Applicable for testing the performance of automotive wiper motors and assemblies

Basic Functions

1.       Voltage settable; test motor current and speed

2.       No speed sensor required; detect the motor speed directly by spectrum analysis

3.       Show the commutator current waveform

4.       Show real-time curves of current, speed;

5.       Show the waveform when sliders are sliding; detect improper contact of sliders

6.       Brake-to-stop anomaly detection

7.       Gear reduction ratio settable, high-speed and low-speed test, high and low speed difference test

8.       Using motor terminal voltage feedback in internal precision programmable SMPS, fully offset the test circuit voltage drop and keep the voltage actually applied on a motor accurate

9.       Built-in programmable SMPS used to automatically limit the output current based on the rated power; when the motor does not rotate or is short circuited during the test in case of motor quality problems or operator error, the instrument can automatically monitor abnormalities and turn off the power in a short time. Once external abnormalities are released, the instrument can automatically resume work. By this way, it keeps the system secure and reliable

10.    Manual & auto test modes available; create motor model projects

11.    Set Limits for test items, issue sound or light alarm in case of test data over-limit, give NG or GO result in the screen, and issue sound or light alarm in case of NG

12.    Save test data in Excel, and export them via a USB interface


Wiper Assembly Swing Test

Direction Auto-Identification

Current Change Test

HIPOT, Insulation Resistance Test

Current Waveform Detection & Analysis

Total Vibration Acceleration Test

Total Noise dB(A) Test (with no noise isolation room required)

Abnormal Sound Auto-Identification

Label Print and Check

Pneumatic Fixtures at Both Stations

System Error Prevention & Correction

System Integration

Technical Specifications



Rated Voltage

230 V

No-Load Current

0.130 A

No-Load Speed

20100 RPM

Supply Output Power

600 W

Voltage Test Accuracy


Current Test Accuracy


Speed Test Accuracy


Dropout Pulse of Positioning Slider



10-inch color touch screen

Host Computer

CPU clock speed 1.6G, hard drive 32G, memory 2G

Power Supply

Voltage 220V 50Hz, capacity 1.2kVA

Operating Environment

Temperature 040, humidity 85%

Outline Dimensions

W × H × D = 430 × 280 × 280


For technical indicators, test functions, system functions, shape & structure, configuration of fixtures & clamps, the ordering requirements shall prevail

网站设计Hits:4742  AoboorUpdateTime:2014-6-12 【Print】 【Close
Sales TEL: 021-56987200 66056657 Fax: 021-56987210 Switchboard: 021-56989500 56987206
1233 New Republic Rd. (near N. Zhongshan Rd.), Shanghai 200070

Copyright@2001-2020 Shanghai Aoboor Electric Co.,Ltd. China ICP No.2021022848